very strong problem solving skills

At my current job as an operations analyst at XYZ Inc., my boss set a quarterly goal to cut contractor spending by 25% while maintaining the same level of production and moving more processes in-house. It turned out that achieving this goal required hiring an additional 6 full-time employees, which got stalled due to the pandemic. I suggested that we widen our net and hire remote employees after our initial applicant pool had no solid candidates. I ran the analysis on overhead costs and found that if even 4 of the 6 employees were remote, we’d save 16% annually compared to the contractors’ rates. In the end, all 6 employees we hired were fully remote, and we cut costs by 26% while production rose by a modest amount.

I try to step back and gather research as my first step. For instance, I had a client who needed a graphic designer to work with Crello, which I had never seen before, let alone used. After getting the project details straight, I began meticulously studying the program the YouTube tutorials, and the quick course Crello provides. I also reached out to coworkers who had worked on projects for this same client in the past. Once I felt comfortable with the software, I started work immediately. It was a slower process because I had to be more methodical in my approach, but by putting in some extra hours, I turned in the project ahead of schedule. The client was thrilled with my work and was shocked to hear me joke afterward that it was my first time using Crello.

As a digital marketer , website traffic and conversion rates are my ultimate metrics. However, I also track less visible metrics that can illuminate the story behind the results. For instance, using Google Analytics, I found that 78% of our referral traffic was coming from one affiliate, but that these referrals were only accounting for 5% of our conversions. Another affiliate, who only accounted for about 10% of our referral traffic, was responsible for upwards of 30% of our conversions. I investigated further and found that the second, more effective affiliate was essentially qualifying our leads for us before sending them our way, which made it easier for us to close. I figured out exactly how they were sending us better customers, and reached out to the first, more prolific but less effective affiliate with my understanding of the results. They were able to change their pages that were referring us traffic, and our conversions from that source tripled in just a month. It showed me the importance of digging below the “big picture” metrics to see the mechanics of how revenue was really being generated through digital marketing.

You can bring up your problem-solving skills in your resume summary statement , in your work experience , and under your education section , if you’re a recent graduate. The key is to include items on your resume that speak direclty to your ability to solve problems and generate results.

If you can, quantify your problem-solving accomplishments on your your resume . Hiring managers and recruiters are always more impressed with results that include numbers because they provide much-needed context.

This sample resume for a Customer Service Representative will give you an idea of how you can work problem solving into your resume.

Michelle Beattle 111 Millennial Parkway Chicago, IL 60007 (555) 987-6543 [email protected] Professional Summary Qualified Customer Services Representative with 3 years in a high-pressure customer service environment. Professional, personable, and a true problem solver. Work History ABC Store — Customer Service Representative 01/2015 — 12/2017 Managed in-person and phone relations with customers coming in to pick up purchases, return purchased products, helped find and order items not on store shelves, and explained details and care of merchandise. Became a key player in the customer service department and was promoted to team lead. XYZ Store — Customer Service Representative/Night Manager 01/2018 — 03/2020, released due to Covid-19 layoffs Worked as the night manager of the customer service department and filled in daytime hours when needed. Streamlined a process of moving customers to the right department through an app to ease the burden on the phone lines and reduce customer wait time by 50%. Was working on additional wait time problems when the Covid-19 pandemic caused our stores to close permanently. Education Chicago Tech 2014-2016 Earned an Associate’s Degree in Principles of Customer Care Skills Strong customer service skills Excellent customer complaint resolution Stock record management Order fulfillment New product information Cash register skills and proficiency Leader in problem solving initiatives

You can see how the resume gives you a chance to point out your problem-solving skills and to show where you used them a few times. Your cover letter is your chance to introduce yourself and list a few things that make you stand out from the crowd.

Michelle Beattle 111 Millennial Parkway Chicago, IL 60007 (555) 987-6543 [email protected] Dear Mary McDonald, I am writing in response to your ad on Zippia for a Customer Service Representative . Thank you for taking the time to consider me for this position. Many people believe that a job in customer service is simply listening to people complain all day. I see the job as much more than that. It’s an opportunity to help people solve problems, make their experience with your company more enjoyable, and turn them into life-long advocates of your brand. Through my years of experience and my educational background at Chicago Tech, where I earned an Associate’s Degree in the Principles of Customer Care, I have learned that the customers are the lifeline of the business and without good customer service representatives, a business will falter. I see it as my mission to make each and every customer I come in contact with a fan. I have more than five years of experience in the Customer Services industry and had advanced my role at my last job to Night Manager. I am eager to again prove myself as a hard worker, a dedicated people person, and a problem solver that can be relied upon. I have built a professional reputation as an employee that respects all other employees and customers, as a manager who gets the job done and finds solutions when necessary, and a worker who dives in to learn all she can about the business. Most of my customers have been very satisfied with my resolution ideas and have returned to do business with us again. I believe my expertise would make me a great match for LMNO Store. I have enclosed my resume for your review, and I would appreciate having the opportunity to meet with you to further discuss my qualifications. Thank you again for your time and consideration. Sincerely, Michelle Beattle

You’ve no doubt noticed that many of the skills listed in the problem-solving process are repeated. This is because having these abilities or talents is so important to the entire course of getting a problem solved.

In fact, they’re worthy of a little more attention. Many of them are similar, so we’ll pull them together and discuss how they’re important and how they work together.

Communication, active listening, and customer service skills. No matter where you are in the process of problem-solving, you need to be able to show that you’re listening and engaged and really hearing what the problem is or what a solution may be.

Obviously, the other part of this is being able to communicate effectively so people understand what you’re saying without confusion. Rolled into this are customer service skills , which really are all about listening and responding appropriately — it’s the ultimate in interpersonal communications.

Analysis (data and historical), research, and topic knowledge/understanding. This is how you intellectually grasp the issue and approach it. This can come from studying the topic and the process or it can come from knowledge you’ve gained after years in the business. But the best solutions come from people who thoroughly understand the problem.

Creativity, brainstorming, troubleshooting, and flexibility. All of you creative thinkers will like this area because it’s when your brain is at its best.

Coming up with ideas, collaborating with others, leaping over hurdles, and then being able to change courses immediately, if need be, are all essential. If you’re not creative by nature, then having a team of diverse thinkers can help you in this area.

Dependability, believability, trustworthiness, and follow-through. Think about it, these are all traits a person needs to have to make change happen and to make you comfortable taking that next step with them. Someone who is shifty and shady and never follows through, well, you’re simply not going to do what they ask, are you?

Leadership, teambuilding, decision-making, and project management. These are the skills that someone who is in charge is brimming with. These are the leaders you enjoy working for because you know they’re doing what they can to keep everything in working order. These skills can be learned but they’re often innate.

Prioritizing, prediction, forecasting, evaluating and weighing, and process flow. If you love flow charts, data analysis, prediction modeling, and all of that part of the equation, then you might have some great problem-solving abilities.

These are all great skills because they can help you weed out bad ideas, see flaws, and save massive amounts of time in trial and error.

What is a good example of problem-solving skills?

Good examples of porblem-solving skills include research, analysis, creativity, communciation, and decision-making. Each of these skills build off one another to contribute to the problem solving process. Research and analysis allow you to identify a problem.

Creativity and analysis help you consider different solutions. Meanwhile, communication and decision-making are key to working with others to solve a problem on a large scale.

What are 3 key attributes of a good problem solver?

3 key attributes of a good problem solver are persistence, intellegince, and empathy. Persistence is crucial to remain motivated to work through challenges. Inellegince is needed to make smart, informed choices. Empathy is crucial to maintain positive relationships with others as well as yourself.

What can I say instead of problem-solving skills?

Instead of saying problem-solving skills, you can say the following:

Critical thinker

Solutions-oriented

Engineering

Using different words is helpful, especially when writing your resume and cover letter.

What is problem-solving in the workplace?

Problem-solving in the workplace is the ability to work through any sort of challenge, conflict, or unexpected situation and still achieve business goals. Though it varies by profession, roblem-solving in the workplace is very important for almost any job, because probelms are inevitable. You need to have the appropriate level of problem-solving skills if you want to succeed in your career, whatever it may be.

Department of Labor – Problem Solving and Critical Thinking

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.

Kristin Kizer is an award-winning writer, television and documentary producer, and content specialist who has worked on a wide variety of written, broadcast, and electronic publications. A former writer/producer for The Discovery Channel, she is now a freelance writer and delighted to be sharing her talents and time with the wonderful Zippia audience.

Recent Job Searches

Inductive Reasoning: What Is It? (With Examples)

Most Important Rhetorical Skills (With Examples)

15 High Income Skills To Earn More In 2022

15 High Income Skills To Earn More In 2023

What Is Aptitude And Why Do You Need To Know About It?

Topics: Desired Traits , Skills

Introduction to Problem Solving Skills

What is problem solving and why is it important.

The ability to solve problems is a basic life skill and is essential to our day-to-day lives, at home, at school, and at work. We solve problems every day without really thinking about how we solve them. For example: it’s raining and you need to go to the store. What do you do? There are lots of possible solutions. Take your umbrella and walk. If you don't want to get wet, you can drive, or take the bus. You might decide to call a friend for a ride, or you might decide to go to the store another day. There is no right way to solve this problem and different people will solve it differently.

Problem solving is the process of identifying a problem, developing possible solution paths, and taking the appropriate course of action.

Why is problem solving important? Good problem solving skills empower you not only in your personal life but are critical in your professional life. In the current fast-changing global economy, employers often identify everyday problem solving as crucial to the success of their organizations. For employees, problem solving can be used to develop practical and creative solutions, and to show independence and initiative to employers.

Throughout this case study you will be asked to jot down your thoughts in idea logs. These idea logs are used for reflection on concepts and for answering short questions. When you click on the "Next" button, your responses will be saved for that page. If you happen to close the webpage, you will lose your work on the page you were on, but previous pages will be saved. At the end of the case study, click on the "Finish and Export to PDF" button to acknowledge completion of the case study and receive a PDF document of your idea logs.

What Does Problem Solving Look Like?

IDEAL heuristic strategy for problem solving

The ability to solve problems is a skill, and just like any other skill, the more you practice, the better you get. So how exactly do you practice problem solving? Learning about different problem solving strategies and when to use them will give you a good start. Problem solving is a process. Most strategies provide steps that help you identify the problem and choose the best solution. There are two basic types of strategies: algorithmic and heuristic.

Algorithmic strategies are traditional step-by-step guides to solving problems. They are great for solving math problems (in algebra: multiply and divide, then add or subtract) or for helping us remember the correct order of things (a mnemonic such as “Spring Forward, Fall Back” to remember which way the clock changes for daylight saving time, or “Righty Tighty, Lefty Loosey” to remember what direction to turn bolts and screws). Algorithms are best when there is a single path to the correct solution.

But what do you do when there is no single solution for your problem? Heuristic methods are general guides used to identify possible solutions. A popular one that is easy to remember is IDEAL [ Bransford & Stein, 1993 ] :

IDEAL is just one problem solving strategy. Building a toolbox of problem solving strategies will improve your problem solving skills. With practice, you will be able to recognize and use multiple strategies to solve complex problems.

Watch the video

What is the best way to get a peanut out of a tube that cannot be moved? Watch a chimpanzee solve this problem in the video below [ Geert Stienissen, 2010 ].

[PDF transcript]

Describe the series of steps you think the chimpanzee used to solve this problem.

[Page 2: What does Problem Solving Look Like?] Describe the series of steps you think the chimpanzee used to solve this problem.

Think of an everyday problem you've encountered recently and describe your steps for solving it.

[Page 2: What does Problem Solving Look Like?] Think of an everyday problem you've encountered recently and describe your steps for solving it.

Developing Problem Solving Processes

Problem solving is a process that uses steps to solve problems. But what does that really mean? Let's break it down and start building our toolbox of problem solving strategies.

What is the first step of solving any problem? The first step is to recognize that there is a problem and identify the right cause of the problem. This may sound obvious, but similar problems can arise from different events, and the real issue may not always be apparent. To really solve the problem, it's important to find out what started it all. This is called identifying the root cause .

Example: You and your classmates have been working long hours on a project in the school's workshop. The next afternoon, you try to use your student ID card to access the workshop, but discover that your magnetic strip has been demagnetized. Since the card was a couple of years old, you chalk it up to wear and tear and get a new ID card. Later that same week you learn that several of your classmates had the same problem! After a little investigation, you discover that a strong magnet was stored underneath a workbench in the workshop. The magnet was the root cause of the demagnetized student ID cards.

The best way to identify the root cause of the problem is to ask questions and gather information. If you have a vague problem, investigating facts is more productive than guessing a solution. Ask yourself questions about the problem. What do you know about the problem? What do you not know? When was the last time it worked correctly? What has changed since then? Can you diagram the process into separate steps? Where in the process is the problem occurring? Be curious, ask questions, gather facts, and make logical deductions rather than assumptions.

Watch Adam Savage from Mythbusters, describe his problem solving process [ ForaTv, 2010 ]. As you watch this section of the video, try to identify the questions he asks and the different strategies he uses.

Adam Savage shared many of his problem solving processes. List the ones you think are the five most important. Your list may be different from other people in your class—that's ok!

[Page 3: Developing Problem Solving Processes] Adam Savage shared many of his problem solving processes. List the ones you think are the five most important.

“The ability to ask the right question is more than half the battle of finding the answer.” — Thomas J. Watson , founder of IBM

Voices From the Field: Solving Problems

In manufacturing facilities and machine shops, everyone on the floor is expected to know how to identify problems and find solutions. Today's employers look for the following skills in new employees: to analyze a problem logically, formulate a solution, and effectively communicate with others.

In this video, industry professionals share their own problem solving processes, the problem solving expectations of their employees, and an example of how a problem was solved.

Meet the Partners:

Making Decisions

Now that you have a couple problem solving strategies in your toolbox, let's practice. In this exercise, you are given a scenario and you will be asked to decide what steps you would take to identify and solve the problem.

Scenario: You are a new employee and have just finished your training. As your first project, you have been assigned the milling of several additional components for a regular customer. Together, you and your trainer, Bill, set up for the first run. Checking your paperwork, you gather the tools and materials on the list. As you are mounting the materials on the table, you notice that you didn't grab everything and hurriedly grab a few more items from one of the bins. Once the material is secured on the CNC table, you load tools into the tool carousel in the order listed on the tool list and set the fixture offsets.

Bill tells you that since this is a rerun of a job several weeks ago, the CAD/CAM model has already been converted to CNC G-code. Bill helps you download the code to the CNC machine. He gives you the go-ahead and leaves to check on another employee. You decide to start your first run.

What problems did you observe in the video?

As you are cleaning up, you think about what happened and wonder why it happened. You try to create a mental picture of what happened. You are not exactly sure what the end mill hit, but it looked like it might have hit the dowel pin. You wonder if you grabbed the correct dowel pins from the bins earlier.

You can think of two possible next steps. You can recheck the dowel pin length to make sure it is the correct length, or do a dry run using the CNC single step or single block function with the spindle empty to determine what actually happened.

You notice that your trainer, Bill, is still on the floor and decide to ask him for help. You describe the problem to him. Bill asks if you know what the end mill ran into. You explain that you are not sure but you think it was the dowel pin. Bill reminds you that it is important to understand what happened so you can fix the correct problem. He suggests that you start all over again and begin with a dry run using the single step/single block function, with the spindle empty, to determine what it hit. Or, since it happened at the end, he mentions that you can also check the G-code to make sure the Z-axis is raised before returning to the home position.

You finish cleaning up and check the CNC for any damage. Luckily, everything looks good. You check your paperwork and gather the components and materials again. You look at the dowel pins you used earlier, and discover that they are not the right length. As you go to grab the correct dowel pins, you have to search though several bins. For the first time, you are aware of the mess - it looks like the dowel pins and other items have not been put into the correctly labeled bins. You spend 30 minutes straightening up the bins and looking for the correct dowel pins.

Finally finding them, you finish setting up. You load tools into the tool carousel in the order listed on the tool list and set the fixture offsets. Just to make sure, you use the CNC single step/single block function, to do a dry run of the part. Everything looks good! You are ready to create your first part. The first component is done, and, as you admire your success, you notice that the part feels hotter than it should.

You wonder why? You go over the steps of the process to mentally figure out what could be causing the residual heat. You wonder if there is a problem with the CNC's coolant system or if the problem is in the G-code.

Look at the G-code.

After thinking about the problem, you decide that maybe there's something wrong with the setup. First, you clean up the damaged materials and remove the broken tool. You check the CNC machine carefully for any damage. Luckily, everything looks good. It is time to start over again from the beginning.

You again check your paperwork and gather the tools and materials on the setup sheet. After securing the new materials, you use the CNC single step/single block function with the spindle empty, to do a dry run of the part. You watch carefully to see if you can figure out what happened. It looks to you like the spindle barely misses hitting the dowel pin. You determine that the end mill was broken when it hit the dowel pin while returning to the start position.

After conducting a dry run using the single step/single block function, you determine that the end mill was damaged when it hit the dowel pin on its return to the home position. You discuss your options with Bill. Together, you decide the best thing to do would be to edit the G-code and raise the Z-axis before returning to home. You open the CNC control program and edit the G-code. Just to make sure, you use the CNC single step/single block function, to do another dry run of the part. You are ready to create your first part. It works. You first part is completed. Only four more to go.

As you are cleaning up, you notice that the components are hotter than you expect and the end mill looks more worn than it should be. It dawns on you that while you were milling the component, the coolant didn't turn on. You wonder if it is a software problem in the G-code or hardware problem with the CNC machine.

It's the end of the day and you decide to finish the rest of the components in the morning.

You decide that the best thing to do would be to edit the G-code and raise the Z-axis of the spindle before it returns to home. You open the CNC control program and edit the G-code.

While editing the G-code to raise the Z-axis, you notice that the coolant is turned off at the beginning of the code and at the end of the code. The coolant command error caught your attention because your coworker, Mark, mentioned having a similar issue during lunch. You change the coolant command to turn the mist on.

As you reflect on the residual heat problem, you think about the machining process and the factors that could have caused the issue. You try to think of anything and everything that could be causing the issue. Are you using the correct tool for the specified material? Are you using the specified material? Is it running at the correct speed? Is there enough coolant? Are there chips getting in the way?

Wait, was the coolant turned on? As you replay what happened in your mind, you wonder why the coolant wasn't turned on. You decide to look at the G-code to find out what is going on.

From the milling machine computer, you open the CNC G-code. You notice that there are no coolant commands. You add them in and on the next run, the coolant mist turns on and the residual heat issues is gone. Now, its on to creating the rest of the parts.

Have you ever used brainstorming to solve a problem? Chances are, you've probably have, even if you didn't realize it.

You notice that your trainer, Bill, is on the floor and decide to ask him for help. You describe the problem with the end mill breaking, and how you discovered that items are not being returned to the correctly labeled bins. You think this caused you to grab the incorrect length dowel pins on your first run. You have sorted the bins and hope that the mess problem is fixed. You then go on to tell Bill about the residual heat issue with the completed part.

Together, you go to the milling machine. Bill shows you how to check the oil and coolant levels. Everything looks good at the machine level. Next, on the CNC computer, you open the CNC G-code. While looking at the code, Bill points out that there are no coolant commands. Bill adds them in and when you rerun the program, it works.

Bill is glad you mentioned the problem to him. You are the third worker to mention G-code issues over the last week. You noticed the coolant problems in your G-code, John noticed a Z-axis issue in his G-code, and Sam had issues with both the Z-axis and the coolant. Chances are, there is a bigger problem and Bill will need to investigate the root cause .

Talking with Bill, you discuss the best way to fix the problem. Bill suggests editing the G-code to raise the Z-axis of the spindle before it returns to its home position. You open the CNC control program and edit the G-code. Following the setup sheet, you re-setup the job and use the CNC single step/single block function, to do another dry run of the part. Everything looks good, so you run the job again and create the first part. It works. Since you need four of each component, you move on to creating the rest of them before cleaning up and leaving for the day.

It's a new day and you have new components to create. As you are setting up, you go in search of some short dowel pins. You discover that the bins are a mess and components have not been put away in the correctly labeled bins. You wonder if this was the cause of yesterday's problem. As you reorganize the bins and straighten up the mess, you decide to mention the mess issue to Bill in your afternoon meeting.

You describe the bin mess and using the incorrect length dowels to Bill. He is glad you mentioned the problem to him. You are not the first person to mention similar issues with tools and parts not being put away correctly. Chances are there is a bigger safety issue here that needs to be addressed in the next staff meeting.

In any workplace, following proper safety and cleanup procedures is always important. This is especially crucial in manufacturing where people are constantly working with heavy, costly and sometimes dangerous equipment. When issues and problems arise, it is important that they are addressed in an efficient and timely manner. Effective communication is an important tool because it can prevent problems from recurring, avoid injury to personnel, reduce rework and scrap, and ultimately, reduce cost, and save money.

You now know that the end mill was damaged when it hit the dowel pin. It seems to you that the easiest thing to do would be to edit the G-code and raise the Z-axis position of the spindle before it returns to the home position. You open the CNC control program and edit the G-code, raising the Z-axis. Starting over, you follow the setup sheet and re-setup the job. This time, you use the CNC single step/single block function, to do another dry run of the part. Everything looks good, so you run the job again and create the first part.

At the end of the day, you are reviewing your progress with your trainer, Bill. After you describe the day's events, he reminds you to always think about safety and the importance of following work procedures. He decides to bring the issue up in the next morning meeting as a reminder to everyone.

In any workplace, following proper procedures (especially those that involve safety) is always important. This is especially crucial in manufacturing where people are constantly working with heavy, costly, and sometimes dangerous equipment. When issues and problems arise, it is important that they are addressed in an efficient and timely manner. Effective communication is an important tool because it can prevent problems from recurring, avoid injury to personnel, reduce rework and scrap, and ultimately, reduce cost, and save money. One tool to improve communication is the morning meeting or huddle.

The next morning, you check the G-code to determine what is wrong with the coolant. You notice that the coolant is turned off at the beginning of the code and also at the end of the code. This is strange. You change the G-code to turn the coolant on at the beginning of the run and off at the end. This works and you create the rest of the parts.

Throughout the day, you keep wondering what caused the G-code error. At lunch, you mention the G-code error to your coworker, John. John is not surprised. He said that he encountered a similar problem earlier this week. You decide to talk with your supervisor the next time you see him.

You are in luck. You see your supervisor by the door getting ready to leave. You hurry over to talk with him. You start off by telling him about how you asked Bill for help. Then you tell him there was a problem and the end mill was damaged. You describe the coolant problem in the G-code. Oh, and by the way, John has seen a similar problem before.

Your supervisor doesn't seem overly concerned, errors happen. He tells you "Good job, I am glad you were able to fix the issue." You are not sure whether your supervisor understood your explanation of what happened or that it had happened before.

The challenge of communicating in the workplace is learning how to share your ideas and concerns. If you need to tell your supervisor that something is not going well, it is important to remember that timing, preparation, and attitude are extremely important.

It is the end of your shift, but you want to let the next shift know that the coolant didn't turn on. You do not see your trainer or supervisor around. You decide to leave a note for the next shift so they are aware of the possible coolant problem. You write a sticky note and leave it on the monitor of the CNC control system.

How effective do you think this solution was? Did it address the problem?

In this scenario, you discovered several problems with the G-code that need to be addressed. When issues and problems arise, it is important that they are addressed in an efficient and timely manner. Effective communication is an important tool because it can prevent problems from recurring and avoid injury to personnel. The challenge of communicating in the workplace is learning how and when to share your ideas and concerns. If you need to tell your co-workers or supervisor that there is a problem, it is important to remember that timing and the method of communication are extremely important.

You are able to fix the coolant problem in the G-code. While you are glad that the problem is fixed, you are worried about why it happened in the first place. It is important to remember that if a problem keeps reappearing, you may not be fixing the right problem. You may only be addressing the symptoms.

You decide to talk to your trainer. Bill is glad you mentioned the problem to him. You are the third worker to mention G-code issues over the last week. You noticed the coolant problems in your G-code, John noticed a Z-axis issue in his G-code, and Sam had issues with both the Z-axis and the coolant. Chances are, there is a bigger problem and Bill will need to investigate the root cause .

Over lunch, you ask your coworkers about the G-code problem and what may be causing the error. Several people mention having similar problems but do not know the cause.

You have now talked to three coworkers who have all experienced similar coolant G-code problems. You make a list of who had the problem, when they had the problem, and what each person told you.

When you see your supervisor later that afternoon, you are ready to talk with him. You describe the problem you had with your component and the damaged bit. You then go on to tell him about talking with Bill and discovering the G-code issue. You show him your notes on your coworkers' coolant issues, and explain that you think there might be a bigger problem.

You supervisor thanks you for your initiative in identifying this problem. It sounds like there is a bigger problem and he will need to investigate the root cause. He decides to call a team huddle to discuss the issue, gather more information, and talk with the team about the importance of communication.

Root Cause Analysis

Root cause analysis ( RCA ) is a method of problem solving that identifies the underlying causes of an issue. Root cause analysis helps people answer the question of why the problem occurred in the first place. RCA uses clear cut steps in its associated tools, like the "5 Whys Analysis" and the "Cause and Effect Diagram," to identify the origin of the problem, so that you can:

RCA works under the idea that systems and events are connected. An action in one area triggers an action in another, and another, and so on. By tracing back these actions, you can discover where the problem started and how it developed into the problem you're now facing. Root cause analysis can prevent problems from recurring, reduce injury to personnel, reduce rework and scrap, and ultimately, reduce cost and save money. There are many different RCA techniques available to determine the root cause of a problem. These are just a few:

How Huddles Work

Communication is a vital part of any setting where people work together. Effective communication helps employees and managers form efficient teams. It builds trusts between employees and management, and reduces unnecessary competition because each employee knows how their part fits in the larger goal.

One tool that management can use to promote communication in the workplace is the huddle . Just like football players on the field, a huddle is a short meeting where everyone is standing in a circle. A daily team huddle ensures that team members are aware of changes to the schedule, reiterated problems and safety issues, and how their work impacts one another. When done right, huddles create collaboration, communication, and accountability to results. Impromptu huddles can be used to gather information on a specific issue and get each team member's input.

The most important thing to remember about huddles is that they are short, lasting no more than 10 minutes, and their purpose is to communicate and identify. In essence, a huddle’s purpose is to identify priorities, communicate essential information, and discover roadblocks to productivity.

Who uses huddles? Many industries and companies use daily huddles. At first thought, most people probably think of hospitals and their daily patient update meetings, but lots of managers use daily meetings to engage their employees. Here are a few examples:

Brainstorming

One tool that can be useful in problem solving is brainstorming . Brainstorming is a creativity technique designed to generate a large number of ideas for the solution to a problem. The method was first popularized in 1953 by Alex Faickney Osborn in the book Applied Imagination . The goal is to come up with as many ideas as you can in a fixed amount of time. Although brainstorming is best done in a group, it can be done individually. Like most problem solving techniques, brainstorming is a process.

When used during problem solving, brainstorming can offer companies new ways of encouraging staff to think creatively and improve production. Brainstorming relies on team members' diverse experiences, adding to the richness of ideas explored. This means that you often find better solutions to the problems. Team members often welcome the opportunity to contribute ideas and can provide buy-in for the solution chosen—after all, they are more likely to be committed to an approach if they were involved in its development. What's more, because brainstorming is fun, it helps team members bond.

Importance of Good Communication and Problem Description

talking too much when describing a problem

Communication is one of the most frequent activities we engage in on a day-to-day basis. At some point, we have all felt that we did not effectively communicate an idea as we would have liked. The key to effective communication is preparation. Rather than attempting to haphazardly improvise something, take a few minutes and think about what you want say and how you will say it. If necessary, write yourself a note with the key points or ideas in the order you want to discuss them. The notes can act as a reminder or guide when you talk to your supervisor.

Tips for clear communication of an issue:

Not all communication is spoken. Body language is nonverbal communication that includes your posture, your hands and whether you make eye contact. These gestures can be subtle or overt, but most importantly they communicate meaning beyond what is said. When having a conversation, pay attention to how you stand. A stiff position with arms crossed over your chest may imply that you are being defensive even if your words state otherwise. Shoving your hands in your pockets when speaking could imply that you have something to hide. Be wary of using too many hand gestures because this could distract listeners from your message.

The challenge of communicating in the workplace is learning how and when to share your ideas or concerns. If you need to tell your supervisor or co-worker about something that is not going well, keep in mind that good timing and good attitude will go a long way toward helping your case.

Like all skills, effective communication needs to be practiced. Toastmasters International is perhaps the best known public speaking organization in the world. Toastmasters is open to anyone who wish to improve their speaking skills and is willing to put in the time and effort to do so. To learn more, visit Toastmasters International .

Methods of Communication

Communication of problems and issues in any workplace is important, particularly when safety is involved. It is therefore crucial in manufacturing where people are constantly working with heavy, costly, and sometimes dangerous equipment. As issues and problems arise, they need to be addressed in an efficient and timely manner. Effective communication is an important skill because it can prevent problems from recurring, avoid injury to personnel, reduce rework and scrap, and ultimately, reduce cost and save money.

There are many different ways to communicate: in person, by phone, via email, or written. There is no single method that fits all communication needs, each one has its time and place.

In person: In the workplace, face-to-face meetings should be utilized whenever possible. Being able to see the person you need to speak to face-to-face gives you instant feedback and helps you gauge their response through their body language. Be careful of getting sidetracked in conversation when you need to communicate a problem.

Email: Email has become the communication standard for most businesses. It can be accessed from almost anywhere and is great for things that don’t require an immediate response. Email is a great way to communicate non-urgent items to large amounts of people or just your team members. One thing to remember is that most people's inboxes are flooded with emails every day and unless they are hyper vigilant about checking everything, important items could be missed. For issues that are urgent, especially those around safety, email is not always be the best solution.

Phone: Phone calls are more personal and direct than email. They allow us to communicate in real time with another person, no matter where they are. Not only can talking prevent miscommunication, it promotes a two-way dialogue. You don’t have to worry about your words being altered or the message arriving on time. However, mobile phone use and the workplace don't always mix. In particular, using mobile phones in a manufacturing setting can lead to a variety of problems, cause distractions, and lead to serious injury.

Written: Written communication is appropriate when detailed instructions are required, when something needs to be documented, or when the person is too far away to easily speak with over the phone or in person.

There is no "right" way to communicate, but you should be aware of how and when to use the appropriate form of communication for your situation. When deciding the best way to communicate with a co-worker or manager, put yourself in their shoes, and think about how you would want to learn about the issue. Also, consider what information you would need to know to better understand the issue. Use your good judgment of the situation and be considerate of your listener's viewpoint.

Did you notice any other potential problems in the previous exercise?

[Page 6:] Did you notice any other potential problems in the previous exercise?

Summary of Strategies

In this exercise, you were given a scenario in which there was a problem with a component you were creating on a CNC machine. You were then asked how you wanted to proceed. Depending on your path through this exercise, you might have found an easy solution and fixed it yourself, asked for help and worked with your trainer, or discovered an ongoing G-code problem that was bigger than you initially thought.

When issues and problems arise, it is important that they are addressed in an efficient and timely manner. Communication is an important tool because it can prevent problems from recurring, avoid injury to personnel, reduce rework and scrap, and ultimately, reduce cost, and save money. Although, each path in this exercise ended with a description of a problem solving tool for your toolbox, the first step is always to identify the problem and define the context in which it happened.

There are several strategies that can be used to identify the root cause of a problem. Root cause analysis (RCA) is a method of problem solving that helps people answer the question of why the problem occurred. RCA uses a specific set of steps, with associated tools like the “5 Why Analysis" or the “Cause and Effect Diagram,” to identify the origin of the problem, so that you can:

Once the underlying cause is identified and the scope of the issue defined, the next step is to explore possible strategies to fix the problem.

If you are not sure how to fix the problem, it is okay to ask for help. Problem solving is a process and a skill that is learned with practice. It is important to remember that everyone makes mistakes and that no one knows everything. Life is about learning. It is okay to ask for help when you don’t have the answer. When you collaborate to solve problems you improve workplace communication and accelerates finding solutions as similar problems arise.

One tool that can be useful for generating possible solutions is brainstorming . Brainstorming is a technique designed to generate a large number of ideas for the solution to a problem. The method was first popularized in 1953 by Alex Faickney Osborn in the book Applied Imagination. The goal is to come up with as many ideas as you can, in a fixed amount of time. Although brainstorming is best done in a group, it can be done individually.

Depending on your path through the exercise, you may have discovered that a couple of your coworkers had experienced similar problems. This should have been an indicator that there was a larger problem that needed to be addressed.

In any workplace, communication of problems and issues (especially those that involve safety) is always important. This is especially crucial in manufacturing where people are constantly working with heavy, costly, and sometimes dangerous equipment. When issues and problems arise, it is important that they be addressed in an efficient and timely manner. Effective communication is an important tool because it can prevent problems from recurring, avoid injury to personnel, reduce rework and scrap, and ultimately, reduce cost and save money.

One strategy for improving communication is the huddle . Just like football players on the field, a huddle is a short meeting with everyone standing in a circle. A daily team huddle is a great way to ensure that team members are aware of changes to the schedule, any problems or safety issues are identified and that team members are aware of how their work impacts one another. When done right, huddles create collaboration, communication, and accountability to results. Impromptu huddles can be used to gather information on a specific issue and get each team member's input.

To learn more about different problem solving strategies, choose an option below. These strategies accompany the outcomes of different decision paths in the problem solving exercise.

View Problem Solving Strategies Select a strategy below... Root Cause Analysis How Huddles Work Brainstorming Importance of Good Problem Description Methods of Communication

Provide a clear summary of the problem. Start at the beginning, give relevant facts, timelines, and examples.

In person: In the workplace, face-to-face meetings should be utilized whenever possible. Being able to see the person you need to speak to face-to-face gives you instant feedback and helps you gauge their response in their body language. Be careful of getting sidetracked in conversation when you need to communicate a problem.

There is no "right" way to communicate, but you should be aware of how and when to use the appropriate form of communication for the situation. When deciding the best way to communicate with a co-worker or manager, put yourself in their shoes, and think about how you would want to learn about the issue. Also, consider what information you would need to know to better understand the issue. Use your good judgment of the situation and be considerate of your listener's viewpoint.

"Never try to solve all the problems at once — make them line up for you one-by-one.” — Richard Sloma

Problem Solving: An Important Job Skill

Problem solving improves efficiency and communication on the shop floor. It increases a company's efficiency and profitability, so it's one of the top skills employers look for when hiring new employees. Recent industry surveys show that employers consider soft skills, such as problem solving, as critical to their business’s success.

The 2011 survey, "Boiling Point? The skills gap in U.S. manufacturing ," polled over a thousand manufacturing executives who reported that the number one skill deficiency among their current employees is problem solving, which makes it difficult for their companies to adapt to the changing needs of the industry.

In this video, industry professionals discuss their expectations and present tips for new employees joining the manufacturing workforce.

Quick Summary

Scam alert banner

Beware there has recently been an increase in reported recruitment scams currently targeting jobseekers. These scams trick you into handing over your money by offering you a ‘guaranteed’ way to make fast money or a high-paying job for little effort. Click here for more details.

Career Advice | How To Improve Problem Solving Skills | Hays

How to improve your problem solving skills | main region, how to improve your problem solving skills.

Regardless of your job and industry, there are certain soft skills that are universally valued by employers. Problem solving is one of them, yet the ability to solve problems is not a skill that comes naturally to everyone. In fact, problem solving can be a very difficult skill to master. As the world of work becomes more complex and fast-moving, the ability to find the cause of complex problems then solve them will become increasingly vital. So, if you need to enhance your problem solving skills in response to this growing demand for problem solvers, we share a few practical tips below.

What are problem solving skills?

5 ways to improve your problem solving skills, 1. identity and understand the right problem, 2. research the systems and practices behind the problem, 3. visualise the problem, 4. brainstorm creative solutions, 5. identify the best answer, problem solving skills: next steps, soft skills guide, download your copy of the hays soft skills guide.

Enter your details below to download your copy:

Hays Learning

Free online learning courses with hays learning.

Now that you understand what it takes to solve problems effectively, you can further upskill and advance your career with online learning courses. Hays Learning is our online learning platform covering technical, digital and soft skills. With Hays Learning, you can access a range of free online learning courses, including in problem solving.

Event sign up

With free access to hundreds of courses, develop the skills you need to future proof your career. Sign up for free

Skills RH Menu | TS

Skills advice.

Adaptability

Learn how to quickly and successfully embrace change at work.

Communication skills

Understand why effective communication skills are essential.

Critical thinking skills

Enhance your ability to make logical and informed decisions.

Interpersonal skills

Learn how to collaborate and communicate to achieve outcomes.

Presentation skills

Listen to the podcast to learn how to give a presentation that will impress the c-suite.

Problem solving skills

Understand what it takes to solve problems effectively.

Soft skills Find out what 7 essential soft skills you need today to impress the hiring manager.

Teamwork skills

Discover how to develop great teamwork skills in the workplace.

Time management skills

Tips to become an effective time manager at work.

EN Action Another action

How to Improve Your Problem-Solving Skills ?

By Rafis Abazov

The greatness of Apple’s Steve Jobs – in the words of his colleagues – lay in the fact that he was the greatest problem solver of his time. Therefore, it is no surprise that many companies today are hunting for problem solvers. After discussing with my students several approaches to learning problem-solving skills, I decided to choose one of the most widely used and effective five-step formulas from project management, which is called IDEAL: Identify, Define, Examine, Act and Look.

How can you make the most of your time at university and improve your problem-solving skills?

1. identify the problem.

In a nutshell, my definition of problem-solving skills is very simple: it is the ability to identify the nature of a problem, deconstruct it (break it down) and develop an effective set of actions to address the challenges related to it.

Indeed, in some challenging situations many students are overwhelmed with emotions and see just big obstacles, barriers or trouble. However, great problem solvers try usually to identify the very roots of the problematic situation – the nature of a particular problem which can be clearly distinguished, addressed and ultimately solved. It is not enough to say that the situation is bad or out of control, as this is very abstract and unhelpful. It is more important to clarify where those problems and challenges come from. Albert Einstein once said: “The formulation of the problem is often more essential than its solution, which may be merely a matter of mathematical or experimental skill.”

In my experience, the very first step in developing the valuable skills of problem solving is to learn how to look at every situation as an identifiable problem. For example, recently my students in the MDP/Global Classroom program at Al-Farabi Kazakh National University (KazNU) were preparing their applications for a semester abroad program to study sustainable urban development. A host university – Hong Kong Polytechnic University (PolyU) – asked them to identify a problem in their home city and prepare a research proposal on sustainable urban development in order to find a solution for the problem. Of course, at the first brainstorming session the students were only talking about what’s not good and what doesn’t work. But that was too general for a problem-solving proposal. My suggestion was to try to identify the nature of the problem by summarizing a specific situation systematically and in one paragraph.

2. DEFINE the main elements of the problem

The next step in problem solving – and in learning problem-solving skills – is an ability to break down the problem into small pieces, or smaller and more manageable parts by defining the main elements of the problem.

It is an essential step and a skill to develop both psychologically and managerially. Instead of facing a giant, scary, impossible-to-climb monster-mountain, you have to learn how to define smaller roads among the hills and rocks. When you break down a big problem into smaller elements, then you are no longer facing an impossible task, and can go about making several very concrete steps to achieve the goal and solve your problem.

For example, my students in the MDP program at Al-Farabi KazNU met experts and policy practitioners and identified several problems. However, those problems were so complex and so big that they scared the students, who were not sure they could come up with a solution within one semester. We had to conduct several additional rounds of exercises to define the main elements of each problem and prepare a table where a large problem was broken down into several elements.

3. EXAMINE possible solutions

Finding possible solutions is a very tricky step in the problem-solving process, as on the surface it looks like most of the work is already done and the ultimate goal is close. In reality, students should not just look for simplistic ways to address the elements of the problem. They should find the most effective ways and turn them into an opportunity to make a strong success story. Steve Jobs often liked to suggest that when his team was confronted with a problem they had to search for “an elegant, really beautiful solution that works.”

Here students also have to remember that there are risks and factors that are not easy to foresee (but possible to try to predict). In order to become more effective, students need to master creative approaches to searching for solutions, with the aid of techniques such as a problem-solving tree. For every branch (a problem element), students have to develop several leaves (possible solutions). An important part of this step of the problem-solving process is to create logical links between different potential solutions, thus reinforcing solutions and creating synergies.

4. ACT on resolving the problem

Developing a step-by-step execution plan and acting effectively and decisively is the final touch in the problem-solving process. This is also an important skill as it doesn’t matter how effectively students identify the problem, define its elements and examine possible solutions; everything still boils down to the ability to perform concrete steps to execute the action plan. Within this problem-solving formula students should also master skills such as monitoring and evaluating the entire action implementation process and – if it is a group undertaking – learn how to delegate certain parts of the work to each other or to external stakeholders.

5. LOOK for lessons to learn

At the moment when the problem is solved, I suggest that students sit down with all their problem-solving trees and action plans, either alone or together if it is a group project. This is the moment to look back and see if there is a need to tune up the work that has been completed. Especially valuable is taking the time to evaluate the entire process and formulating the lessons to be learned so the next problem-solving project will be more effective and produce even more elegant solutions.

This article was originally published in June 2016 . It was last updated in May 2022

Want more content like this Register for free site membership to get regular updates and your own personal content feed.

Dr Rafis Abazov is a visiting professor at Al Farabi Kazakh National University, Almaty, Kazakhstan, where he also manages a joint program with Earth Institute of Columbia University (New York, USA). He has written 10 books, including The Culture and Customs of the Central Asian Republics (2007) and has regularly contributed op-eds to The New York Times. Mr Abazov enjoys collecting rare books on British exploration of Central Asia and reading travelogues on Central Asia and the Middle East by Eugene Schuyler, Vladimir Bartold and Lord George Curzon. He has also authored photo exhibitions about his trips to Central Asian republics, Turkey and Afghanistan.

Contact info: Office 1400 Rectorat, 71 Al Farabi Ave., Al Farabi KazNU, Almaty, 050040, Kazakhstan

+ 3 others saved this article

+ 4 others saved this article

Share this Page

Get assisted by higher education experts

Our expert teams can help start your academic journey by guiding you through the application process.

Scholarships around the world for first-generation students

Six tips for choosing the right master’s degree for you

How to do a Research Project: 6 Steps

Six great benefits of being a mature medical student

What is a PhD?

33 useful websites for students

Most Shared Last year

Future Skills You’ll Need In Your Career By 2030

7 Time Management Tips for Students

6 reasons to go on a student exchange programme

Types of Master’s Degrees

How much does it cost to study in Canada?

What is a Dissertation?

IMAGES

A Beginner's Guide for Becoming a Better Problem Solver
Lesson Plan
Importance of Problem Solving Skills in the Workplace
Success Unlimited Mantra
Problem solving skills
Where the problem solving skills are necessary?

VIDEO

Why problem solving skills you have ?
Lesson 3- Problem Solving and Reasoning
How many of these problem solving skills do you have?
MEET BARRY LEE
How To Improve Problem Solving Skills For Your Work Life
A nursing is a profession ( Part 4 ) #shorts

COMMENTS

What Are Problem-Solving Skills? Definition and Examples
An employee with good problem-solving skills is both a self-starter and a collaborative teammate; they are proactive in understanding the
Problem solving: the mark of an independent employee
Problem solving is all about using logic, as well as imagination, to make sense of a situation and come up with an intelligent solution. In fact, the best
What Are Problem-Solving Skills? Definitions and Examples
What are problem-solving skills? · Active listening · Analysis · Research · Creativity · Communication · Decision-making · Team-building.
The Top 5 Problem-Solving Skills Employers Want In 2023
Problem-solving is a complex skill. It involves critical thinking, decision-making, creativity, and information processing. Effective problem-
Problem Solving Skills
Problem Solving · Creativity. Problems are usually solved either intuitively or systematically. · Researching Skills. Defining and solving problems often requires
Problem Solving Skills: What Are They?
Problem-solving is considered a soft skill (a personal strength) rather than a hard skill that's learned through education or training.
What Are Problem-Solving Skills? (Definition, Examples, And How
Summary. Problem-solving skills include analysis, creativity, prioritization, organization, and troubleshooting. To solve a problem, you need to
Introduction to Problem Solving Skills
Problem solving is the process of identifying a problem, developing possible solution paths, and taking the appropriate course of action. Why is problem solving
Career Advice
Problem solving skills are those that allow you to identify and understand the causes of a problem, then solve it. This can involve solving problems that impact
How to Improve Your Problem-Solving Skills ?
In a nutshell, my definition of problem-solving skills is very simple: it is the ability to identify the nature of a problem, deconstruct it (break it down) and